Altium Designer includes a feature to help with this, called dynamic display of clearance boundaries. When enabled, the no-go clearance area defined by the existing objects + the applicable clearance rule is displayed as shaded polygons within a local viewing circle, as shown in the video below. An Altium Badge of Honor for Engineering Service Bureaus Engineering bureaus are essential to the electronics industry, ensuring high-quality contract work across a wide range of specialties. Altium has partnered with over 800 independent service bureaus over the years, elevating the quality of PCB design.
I wish to configure the USB 2.0 as a UVC device. I have instantiated the UVC code available at github. I am successfully able to connect my kit to the PC, however the USB driver on the PC shows my device as a unknown device. Kindly suggest if any driver is available to interface the board with the PC as UVC device. Thanks & regards. The PC device manager. In this case, the user must install the driver files (see Figure 6: Updating the list of drivers in Device Manager) and update the driver of the connected device from the device manager. Note: Prefer using the “USB Composite Device” handle for a full recovery. Updating the list of drivers in Device Manager.
DAP miniWiggler
Order Nr.: KIT_MINIWIGGLER_USB Price: 109,- EUR : Buy Online
The miniWiggler is Infineon’s high performance and cost-efficient debugging tool for the future. On the host side, it has an USB interface, which is available on every computer. On the device side, the communication goes over Infineon 10-pin DAP or 16-pin OCDSL1 interfaces. The miniWiggler has been designed specifically to work in combination with Infineon’s Debug Access Software (DAS).
- Debugging, Flash Programming
- Altium/TASKING Compiler
- Infineon MemTool
- Hitex HiTOP Debugger
- ARM KEIL uVision
- Colibri i.MX6
- Colibri VFxx
Overview
All Colibri Module comes with one compatible Ethernet interface(10/100Mbps). There is an option of adding a second Ethernet on Memory bus / USB / RMII. Adding another Ethernet port using external USB based Ethernet controller is simple to implement and will be compatible across the Colibri modules. Memory bus implementation of Ethernet is slightly more complex to implement and involve driver modification for Ethernet to work. The memory bus is also not available on all the modules. RMII feature is available only on Vybrid modules and is not compatible with the rest of the Colibri family.
Colibri PXAxxx
Below is the list for Ethernet controller on Colibri PXAxx
For more information go through this article.
Colibri Txx
The Colibri T20, Colibri T30 and Apalis T30 have built-in drivers for the USB attached Ethernet controller AX88772B.
Altium Spi/unio Over Usb Driver Windows 7
Adding a 2nd Ethernet controller of the same type is as simple as adding a few registry keys:
Starting in Image V1.1Beta4, these settings are already included in the default registry.
Colibri i.MX6
2nd Ethernet controller can be connected over USB interface.
2nd Ethernet controller over USB
Colibri i.MX6 modules don't have built-in drivers for the USB attached Ethernet controller AX88772B, but user can install the driver from this cab installer for CE6 and WEC7 or WEC2013.
Colibri VFxx
Altium Spi/unio Over Usb Driver Updater
Colibri VF50 and Colibri VF61 have built-in RMII attached Ethernet controller.
2nd Ethernet controller can be connected over USB or RMII interface.
2nd Ethernet controller over USB
Colibri VFxx modules don't have built-in drivers for the USB attached Ethernet controller AX88772B, but user can install the driver from this cab installer for CE6 and WEC7 or WEC2013.
2nd Ethernet controller over RMII
The Vybrid processor mounted on VF50 and VF61 modules provide a second Ethernet interface that could be enabled in Windows CE. The RMII interface is available on SO-DIMM pins as described in the product datasheet. Please use the link below to download the reference schematics and CAE data for RMII based Ethernet:
NOTE: This feature is not compatible with other modules in the Colibri family.
To enable the second Ethernet interface the following entries should be added to the device registry. After editing, save the registry and reboot the system to activate the settings.
You can even follow the procedure mention below to directly import registry settings:
- Click here to download registry zip file.
- Unzip in USB Flash drive and plug in to the device.
- Double click on the registry file and click 'YES' to import registry settings.
- Click on SaveReg [Start > Programs > ColibriTools > SaveReg] and restart the device.
- Check ENET1 icon in Network and Dial-up Connections [Start > Settings > Control Panel > Network and Dial-up Connections] to confirm 2nd Ethernet has been configured successfully or not.